This BPM counter measures tempo two ways. Tap the pad, click, or press any key in time with the music and it shows the beats per minute from your last eight taps, updating as you go; pause for two seconds and the next tap starts a fresh count. Or drop an audio file and it analyses the track itself and reports the most likely BPM with the alternatives.
The file detector finds where notes and drum hits start (an onset-strength curve in three frequency bands), then measures how regularly those onsets repeat. It is accurate to a fraction of a BPM on music with a steady beat, but it cannot settle one real ambiguity: whether a groove is 85 or 170 BPM depends on what the listener counts. So the result always lists the half- and double-time readings next to the top answer, with a confidence rating; music with rubato, tempo changes or no clear percussion gets a low rating rather than a confident wrong number. Both the taps and the file stay in your browser.
How to use
- To tap: press any key or tap the big pad on every beat. After four taps the BPM appears; keep tapping for eight or more for a steadier reading.
- Check the steadiness figure: under ±3% means your taps were even. Press Reset or pause for two seconds to start over.
- To analyse a file: drop an MP3, WAV, M4A, OGG or FLAC file onto the box below the pad.
- Read the most likely tempo, then its half and double. Tap along with the playing track to confirm which one you count.
- Click the metronome button to practise or play along at that tempo.
Frequently asked questions
How do I find the BPM of a song?
Either tap along: play the song, press any key or tap the pad on every beat for 10–15 seconds, and read the average. Or drop the audio file onto the detector and it measures the tempo from the recording. For a song you can only stream, tapping is the way; most people land within 1 BPM after eight or more steady taps.
Why does the detector say 170 when the song feels like 85?
Because both are true in a sense: an 85 BPM groove with hi-hats on every eighth note also has a steady 170 BPM pulse. Which one is "the" tempo depends on the genre's convention and what you count. The detector prefers tempos near the middle of the usual range and lists the half and double time beside the top answer; pick the one that matches how you count the beat.
How accurate is tapping tempo?
Human taps vary by about 20–30 ms each. Averaging over the last eight taps (seven intervals) brings the error down to roughly ±1 BPM at 120 BPM if you tap steadily, which the steadiness figure shows. For more precision on a recording, use the file detector, which measures to 0.1 BPM on steady music.
Which audio files can it analyse?
Whatever your browser can decode: MP3, WAV, AAC/M4A and OGG/Opus in every modern browser, FLAC in all current ones, AIFF in Safari. Files up to 200 MB are accepted, and up to six minutes of audio is analysed. Video files often work too if the browser can decode their soundtrack; otherwise extract the audio first with the Video to MP3 tool.
Is my music uploaded?
No. The file is decoded by your browser's Web Audio API and analysed by code running on this page. You can confirm in the browser's developer tools: no network request carries the file.
How the BPM detection works
The track is decoded at 22.05 kHz, mixed to mono and cut into overlapping 46 ms frames every 11.6 ms. For each frame the spectrum is compared with the previous one; the sum of the increases (spectral flux) spikes wherever a note or drum hit begins. This is done separately for the bass (kick drum), middle (snare, chords) and treble (hi-hats) ranges.
The autocorrelation of each band's onset curve shows the time spacings at which hits repeat. Every candidate tempo from 50 to 220 BPM is scored by how strongly its beat period and its multiples repeat, minus evidence that the real beat is twice, three times or one and a half times faster in the bass and middle bands. The winner is refined to 0.01 BPM using up to eight seconds of repetitions and reported to 0.1 BPM.
Typical tempos by genre
Rough ranges, useful for sanity-checking a reading: hip-hop 80–100 BPM (often read as 160–200), reggaeton 90–100, pop 100–130, house 120–128, techno 125–140, trance 135–140, dubstep 140 (felt as 70), drum and bass 170–175. If the detector's top answer sits outside the range you expect, the half or double in the list is usually the one you want.
When the result is unreliable
• Tempo changes: one number is reported for the whole file. For a song that speeds up or has a slow intro, cut the section you need first with the Audio Cutter.
• Rubato and live classical recordings: there is no fixed grid to find, and the confidence rating says so.
• Beatless ambient or spoken audio: tapping along, if anything, is the only meaningful measure.
• Swing and shuffle: the off-beats are delayed, which can pull the reading towards the triplet pulse (1.5× the beat).
