Change image DPI to 300, 72 or any value for JPEG, PNG, TIFF and BMP files, in your browser and without touching the pixels. Add one image or a batch, see the DPI each file currently declares and how big it would print, type the new value and download the files one at a time or as a ZIP. Only the resolution fields in the file header change, so the photo is not re-compressed and keeps exactly its quality and almost exactly its size; the tool checks that the image data is byte-for-byte identical before it lets you download.
Be clear about what this does. DPI (strictly PPI) is a number that tells a printer how many pixels to place per inch; changing it does not add detail. A 1200 × 1800 pixel photo is a sharp 4 × 6 inch print at 300 DPI or a soft 12 × 18 inch print at 100 DPI: the same pixels either way. Setting 300 DPI is what a print shop, a publisher's upload form or a visa photo portal often asks for, and that is what this tool is for. If the table below shows you need more pixels for the print size you want, enlarge the image with the AI image upscaler or the image resizer first.
How to use
- Choose your images or drop them on the box: JPEG, PNG, TIFF or BMP, up to 50 at a time.
- Check the Current DPI column. "Not stored" means the file has no DPI and most programs will assume 72 or 96.
- Enter the new DPI or click a preset. 300 is the usual print requirement.
- Read the print size each image will get at that DPI, and the "What DPI do I need" table for the selected file.
- Click Download for one file or Download all as ZIP. Files are named like photo-300dpi.jpg.
Frequently asked questions
How do I change the DPI of an image to 300?
Add the image on this page, click 300 (or type it), and download. The tool writes 300 into the file's resolution fields (JFIF and EXIF in a JPEG, the pHYs chunk in a PNG) without re-encoding the image, then reads the file back to confirm. In Windows, right-click the downloaded file, choose Properties and Details: it shows 300 dpi. On a Mac, Preview's Tools > Show Inspector shows the same.
Does changing DPI improve the quality of an image?
No. DPI only says how large to print the pixels the image already has; quality depends on the number of pixels. Changing 72 to 300 DPI on a 1080 × 1080 image makes the printer print it at 3.6 × 3.6 inches instead of 15 × 15 inches; it does not make it sharper. To print larger at 300 DPI you need more pixels, which means upscaling, and only AI upscaling adds plausible detail.
What DPI do I need for printing?
300 DPI at the final print size is the standard for photos and anything viewed up close; for a 4 × 6 inch print that is 1200 × 1800 pixels, for 8 × 10 inches 2400 × 3000. Around 200 DPI still looks good at arm's length; posters viewed from a distance can go down to 100 to 150. Large-format banners are often printed at 50 to 100. The table in the tool shows the real DPI your image gives at common sizes.
Why does my photo say 72 DPI?
Many cameras, phones, screenshot tools and web exports write 72 DPI (a convention from early Macs) or write nothing, in which case programs show 72 or 96. It says nothing about the image quality: a 12-megapixel phone photo at "72 DPI" is the same 4000 × 3000 pixels and prints at 13 × 10 inches at 300 DPI. Changing the number is only needed when a form or printer checks the field.
Does this work with WebP, GIF or HEIC files?
No, and no tool can do it properly: WebP and AVIF have no DPI field, GIF stores only an aspect ratio, and HEIC keeps resolution only in embedded EXIF that few programs read. Convert the image to PNG (lossless) or JPEG with the image converter first, then set the DPI here. JPEG, PNG, TIFF and BMP are supported.
Will Photoshop, Windows and Mac all show the new DPI?
Yes for the files this tool writes. A JPEG can carry DPI in up to three places (JFIF, EXIF and Photoshop's own resolution record) and different programs read different ones, which is why some photos show 72 in one app and 300 in another. The tool sets every one present to the same value and adds the JFIF field if missing, and the file list warns when an original's fields disagree.
DPI, PPI and pixels: the one formula you need
Print size in inches = pixels ÷ DPI. Multiply inches by 2.54 for centimetres. So 3000 pixels at 300 DPI is 10 inches (25.4 cm), and at 150 DPI it is 20 inches.
Pixels needed = print size in inches × DPI. A4 at 300 DPI is 2480 × 3508 pixels; US Letter is 2550 × 3300; a 5 × 7 card is 1500 × 2100.
Strictly, the number stored in an image is PPI (pixels per inch); DPI is how many ink dots a printer lays down, which is usually much higher. Everyone, including Photoshop and print shops, uses the two words for the same thing when talking about image files.
What changes in the file, and what does not
• JPEG: the JFIF header gets units = inches and the new density; EXIF XResolution, YResolution and ResolutionUnit (and the thumbnail's) are set to match; Photoshop's ResolutionInfo record too, if present. A file without a JFIF header gets one: 18 bytes.
• PNG: the pHYs chunk is written in pixels per metre (300 DPI = 11811) with a fresh checksum, placed before the image data as the PNG specification requires.
• TIFF: XResolution and YResolution are rewritten in place. BMP: the two pixels-per-metre fields.
Nothing else changes: the compressed image data, colour profile, EXIF date and camera fields stay as they were. Because nothing is decoded, even a 50 MB TIFF is done instantly. To see or remove the rest of the metadata, use the EXIF viewer.
Changing DPI versus resizing
Changing DPI keeps the pixels and changes the print size. Resizing (resampling) changes the number of pixels: down to make a file smaller, up to print bigger. Photoshop's Image Size dialog does either depending on the Resample checkbox; this tool is the box unticked.
If a print shop asks for a 300 DPI file at a size your image does not reach, changing the number alone means they will print it smaller or reject it. Enlarge it first: the image resizer for plain resampling, or the AI image upscaler to add plausible detail at 2× or 4×. Then set 300 DPI here.
