Skip to content

Using n8n MCP Skills skill

Route n8n tasks to specialist skills before configuring or changing workflows.

Community · Romuald Członkowski
AuthorRomuald Członkowski
LicenceMIT
Sourceczlonkowski/n8n-skills · SKILL.md on GitHub
Project websitedocs.n8n.io
Works inClaude Code · Codex, Gemini CLI, Cursor, Copilot
Read from the source on

Using n8n MCP Skills skill: Route n8n tasks to specialist skills before configuring or changing workflows.

Select the specialist for expressions, node setup, validation, code, files, errors or deployment.

From the skill's SKILL.md: # Using the n8n-mcp Skills

This is a community skill by Romuald Członkowski, not checked by us or by Anthropic. Skills can tell the agent to run code, read files or call the network. Before installing, read its SKILL.md and every script in the folder, and look for anything that does not match what it says it does.

What it does

  1. Select the specialist for expressions, node setup, validation, code, files, errors or deployment.

What you get

  • A task-specific skill sequence and a validate, read-back and test protocol.

When to use it

  • Plan which n8n skills to load before building this webhook workflow.

When not to use it

  • Treating instructions as a guarantee that a remote service, validation or deployment has succeeded.

What it needs

  • The complete sibling skill pack and a configured n8n-mcp server; live workflow operations also need an authorized n8n instance.

Files in the skill

File or folderWhat it is for
SKILL.mdEntry instructions and task-specific workflow.
README.mdCompanion reference used by this workflow.

Licence as found in the repository on 2026-11-16: MIT.

Example prompts

Type one of these after installing; naming the skill makes sure it is used.

  • Plan which n8n skills to load before building this webhook workflow.
  • Check which MCP tools are actually available before editing my flow.
  • Review this workflow change without activating it or sending real messages.

How to install using-n8n-mcp-skills

Prepare the workflow

The complete sibling skill pack and a configured n8n-mcp server; live workflow operations also need an authorized n8n instance.

The website link is n8n product documentation, not the community MCP server installer. Install n8n-mcp separately; hosting and connected services may cost money. Review plugin hooks before installation.

A skill is a folder with a SKILL.md file. You install it once; the agent reads its short description at the start of each session and loads the full instructions only when a request matches. Pick the place you use:

Claude Code: from the plugin marketplace

  1. Start Claude Code in a terminal with claude.
  2. Add the marketplace (once per computer):
    /plugin marketplace add czlonkowski/n8n-skills
  3. Install the plugin. Claude Code opens its details first: check what it will add (skills, hooks, MCP servers), then choose whether it is for you, for everyone on this repository, or for you in this repository only.
    /plugin install n8n-mcp-skills@n8n-mcp-skills
  4. Type / and look for /n8n-mcp-skills:using-n8n-mcp-skills, or simply ask for the task.

From your shell instead of a session:

claude plugin marketplace add czlonkowski/n8n-skills
claude plugin install n8n-mcp-skills@n8n-mcp-skills

The plugin installs as a whole, so other skills come with it, including n8n-agents, n8n-binary-and-data, n8n-code-javascript, n8n-code-python, n8n-code-tool, n8n-error-handling, n8n-expression-syntax, n8n-mcp-tools-expert, n8n-multi-instance, n8n-node-configuration, n8n-self-hosting, n8n-subworkflows, n8n-validation-expert, n8n-workflow-patterns.

Claude Code: copy the folder into your skills folder

Put the skill's folder in ~/.claude/skills/ to use it in every project on this computer, or in .claude/skills/ inside a repository to share it with everyone who works there (commit it).

git clone --depth 1 https://github.com/czlonkowski/n8n-skills.git
mkdir -p ~/.claude/skills
cp -R n8n-skills/skills/using-n8n-mcp-skills ~/.claude/skills/
cp -R n8n-skills/skills/n8n-agents ~/.claude/skills/
cp -R n8n-skills/skills/n8n-binary-and-data ~/.claude/skills/
cp -R n8n-skills/skills/n8n-code-javascript ~/.claude/skills/
cp -R n8n-skills/skills/n8n-code-python ~/.claude/skills/
cp -R n8n-skills/skills/n8n-code-tool ~/.claude/skills/
cp -R n8n-skills/skills/n8n-error-handling ~/.claude/skills/
cp -R n8n-skills/skills/n8n-expression-syntax ~/.claude/skills/
cp -R n8n-skills/skills/n8n-mcp-tools-expert ~/.claude/skills/
cp -R n8n-skills/skills/n8n-multi-instance ~/.claude/skills/
cp -R n8n-skills/skills/n8n-node-configuration ~/.claude/skills/
cp -R n8n-skills/skills/n8n-self-hosting ~/.claude/skills/
cp -R n8n-skills/skills/n8n-subworkflows ~/.claude/skills/
cp -R n8n-skills/skills/n8n-validation-expert ~/.claude/skills/
cp -R n8n-skills/skills/n8n-workflow-patterns ~/.claude/skills/

Claude Code notices new or changed skills in these folders during the session. If the skills folder did not exist when the session started, run /reload-skills once. Then type /using-n8n-mcp-skills or just describe the task.

On Windows, run the commands in Git Bash or WSL, or copy the folder into the same place with File Explorer.

Codex, Gemini CLI, Cursor and GitHub Copilot

These agents read the same SKILL.md folders. The one folder all four accept inside a project is .agents/skills/, so this copies the skill there:

git clone --depth 1 https://github.com/czlonkowski/n8n-skills.git
mkdir -p .agents/skills
cp -R n8n-skills/skills/using-n8n-mcp-skills .agents/skills/
cp -R n8n-skills/skills/n8n-agents .agents/skills/
cp -R n8n-skills/skills/n8n-binary-and-data .agents/skills/
cp -R n8n-skills/skills/n8n-code-javascript .agents/skills/
cp -R n8n-skills/skills/n8n-code-python .agents/skills/
cp -R n8n-skills/skills/n8n-code-tool .agents/skills/
cp -R n8n-skills/skills/n8n-error-handling .agents/skills/
cp -R n8n-skills/skills/n8n-expression-syntax .agents/skills/
cp -R n8n-skills/skills/n8n-mcp-tools-expert .agents/skills/
cp -R n8n-skills/skills/n8n-multi-instance .agents/skills/
cp -R n8n-skills/skills/n8n-node-configuration .agents/skills/
cp -R n8n-skills/skills/n8n-self-hosting .agents/skills/
cp -R n8n-skills/skills/n8n-subworkflows .agents/skills/
cp -R n8n-skills/skills/n8n-validation-expert .agents/skills/
cp -R n8n-skills/skills/n8n-workflow-patterns .agents/skills/
AgentProject folderYour user folderNotes
OpenAI Codex
.agents/skills/
~/.agents/skills/
Type $ or run /skills to pick a skill; Codex also chooses one when your task matches.
Gemini CLI
.agents/skills/
.gemini/skills/
~/.agents/skills/
~/.gemini/skills/
Or install from Git with gemini skills install <git URL> --path <folder> --consent. Google replaced Gemini CLI with Antigravity CLI for free-tier and Google One users on 18 June 2026; Antigravity uses .agents/skills/ in a project and ~/.gemini/config/skills/ for you.
Cursor
.agents/skills/
.cursor/skills/
~/.agents/skills/
~/.cursor/skills/
Type / in Agent chat to pick a skill. Cursor also reads Claude Code's .claude/skills/ folders.
GitHub Copilot
.github/skills/
.agents/skills/
.claude/skills/
~/.copilot/skills/
~/.agents/skills/
Works in Copilot CLI, the cloud agent, and agent mode in VS Code, Visual Studio and JetBrains (IDE support depends on the version). Or run gh skill install OWNER/REPOSITORY SKILL (public preview, GitHub CLI 2.90.0 or later).
Only install skills you trust. Anthropic's advice is to use skills only from trusted sources, and to read every file of any other skill before using it: a skill can direct the agent to run commands, read files or send data in ways its description does not mention.

Sources for these steps

Checked against each vendor's documentation on 2026-11-14:

Live tools over stale assumptions

Inspect the server tool surface and live node schemas. Documentation and validation tools can work without an instance; management tools require one.

Validation is only one gate

After an update, read back connections and inspect real output values. A successful validation or green run can still hide dropped items or null expressions.

Questions about using-n8n-mcp-skills

Does this website execute the skill?

No. This is a source-based installation guide. Your agent runs the skill in its own configured environment.

Are full cloud workflows verified here?

No. Generic cloud upload and API execution steps are omitted; source-specific local requirements and host capabilities still apply.

Is this a standalone reference?

No. It is the pack router and refers to sibling specialist skills. Install the full plugin or copy the sibling folders too.

Are enforcement hooks portable?

No. The hooks layer belongs to the Claude Code plugin. Copying folders to another agent does not install those hooks.

More AI skills

Related skills

Skill categories